Housing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cap -arrow-.
-- Pull the door handle -1- all the way -arrow A- and hold it.
-- Remove the clamping screw -3- all the way using a screwdriver -5-
-- Push the retaining bracket -4- for the housing inward until it engages -arrow B-.
- The door handle is now locked in the "open" position.
-- Remove the housing -2- from the mounting bracket.