Electro-Hydraulic Engine Mount, Calibrating
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Select the Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Diagnostic-capable systems
- 00BA - Assembly Mount Control Module
- 00BA - Assembly Mount Control Module, Functions
- 00BA - Basic Setting, Performing
- Perform the test