Underbody Trim Panels, Wheel Housing Liners, Side Sills And Lines, Checking For Damage And Proper Attachment

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Procedure:

-- Check all underbody trim panels and wheel housing liners for breaks and tears.

-- Check all underbody trim panels and wheel housing liners for proper attachment by hand, and also check for any missing fasteners.

-- Inspect the side sills for any deformations.

-- Check the lines and their connections in visible areas for proper attachment and damage.

-- Check the stone chip protection on the rear control arm for damage and secure fit.

-- If there are defects, replace the damaged component or replace any missing fasteners.

NOTE:

Stone chip protection is equipment-dependent and is not installed on every vehicle.