Starter, Removing And Installing, Vehicles With 3.0L TDI Engine: Installing
WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Check the sealing piece -arrow- for the correct installation position.
- The area of the torque converter must be completely sealed.
TIP:
If the starter is difficult to install, use isopropyl alcohol spray.
-- Connect the Battery -A-. Required actions. Refer to Connecting .