Oil Pump, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the seal after removal.
- Replace bolts that were tightened with an additional turn after removing them.
-- Check if the alignment sleeves -arrows- for centering the oil pump are installed.
-- Install the seal -1-.
-- Install the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING, WITH LOWER TIMING CHAIN COVER INSTALLED .