Backrest Cover And Cushion, Removing And Installing, Seat Without Pneumatic Components: Removing
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Secure the front seat to the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Equipped on some models: remove the multimedia system display unit. Refer to the appropriate service information .
-- Remove the headrest. Refer to HEADREST, REMOVING AND INSTALLING .
-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING .
-- Release and disconnect the backrest heating wiring harness on the seat pan and free it up.
-- Disengage the hooks on the sides of the backrest frame -A arrows-.
-- Disengage the molding on the backrest frame -B arrows-.
-- Remove the front thorax airbag. Refer to FRONT THORAX AIRBAG WITH IGNITER, REMOVING AND INSTALLING .
-- Disengage the inner molding on the wire frame -arrows-.
-- Loosen the cover with the cushion from the backrest frame and remove forward carefully.