Charge Air Pressure Sensor 2 -G447-, REMOVING AND INSTALLING: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Audi S8: remove the upper left brace. Refer to Overview - Lock Carrier .

-- Loosen the hose clamp -2-, remove the left air duct hose at the top and push to the side.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- and the Charge Air Pressure Sensor 2 -G447-.