Rear Lid Closing Aid Motor -V382-, REMOVING AND INSTALLING, A6 AVANT AND A7 SPORTBACK
Removing
-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Disengage the support bracket -7- by releasing the catches -A arrows-.
-- Disengage the release cable nipple -6- from the release lever -5-.
-- Disconnect the connector -3-.
-- Release the catches -2, 4 and 8- by turning them 90° clockwise -arrow B-.
-- Remove the Rear Lid Closing Assist Motor -V382- -item 1-.
Installing
Install in reverse order of removal.