LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S7 Prestige >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Hood, Lids >> 55 Hood, Lids >> Rear Lid >> Adjusting Buffer, Removing And Installing >> Adjusting Buffer, Removing And Installing, A6 AVANT And A7 SPORTBACK

Adjusting Buffer, Removing And Installing, A6 AVANT And A7 SPORTBACK

Removing 

-- Remove the bolts -arrows-.

GWWA55-11286Courtesy of AUDI OF AMERICA, LLC

-- Remove the adjusting buffer -1-.

Installing 

Install in reverse order of removal and note the following:

-- Adjust the adjusting buffer. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .

Tightening Specifications