Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes

WARNING: This page is about a different car, the 2022 Audi A6 Quattro and 2021 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Valve Seal: 3364
Seal Installer - Valve Stem: 3365 for the valve stem seal with a single sealing lip. Refer to Figure.
Fitting Tool: T40376/1 for the valve stem seal with a double sealing lip. Refer to Figure.
Valve Keeper Tool Kit: VAS5161A with the Valve Cotter Tool Kit - Guide Plate: VAS5161/19C
Engine and Transmission Holder: VAS6095A
Cylinder Head Tensioning Device: VAS6419
Mounting Sleeve. Refer to Parts Information