LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S6 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Crankshaft, Cylinder Block [DMTA,DPAA,DPUA,DPVA,DMTC]) >> 13 Crankshaft, Cylinder Block >> Balance Shaft >> Balance Shaft, Removing And Installing >> Balance Shaft, Removing And Installing, Exhaust Side >> Removing

Balance Shaft, Removing And Installing, Exhaust Side: Removing

WARNING: This page is about a different car, the 2022 Audi A6 Quattro and 2021 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .

-- Remove the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -1- and the exhaust side balance shaft.

Fig 1: Identifying Intake Camshaft Balance Shaft
GWWA15-10467Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals