Overview - Vacuum Pump, 2.0L TFSI Engine

Fig 1: Overview - Vacuum Pump, Vehicles With 2.0L TFSI Engine

Courtesy of AUDI OF AMERICA, LLC

Vacuum Pump
- Removing and installing. Refer to VACUUM PUMP, REMOVING AND INSTALLING, 2.0L TFSI ENGINE .
Gasket
- Replace after removing.
Vacuum Hose
Bolt
- 8 Nm +180°
- Replace after removing.
Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
Bolt
- 9 Nm
Bolt
- 9 Nm
Bolt
- Tightening specification. Refer to OVERVIEW - HIGH PRESSURE PUMP .
  CAUTION:
  Clean the bolts and nuts before reusing.
  
  Replace the bolts and nuts if damaged.
  
  Replace the self-locking bolts and nuts after removing
High Pressure Pump
- Removing and installing. Refer to HIGH PRESSURE PIPE, REMOVING AND INSTALLING .
O-Ring
- Replace after removing.