Overview - Front Thorax Airbag
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
- Backrest Frame
- Front Thorax Airbag
- With
- Driver Thorax Airbag Igniter -N199-
- Front Passenger Thorax Airbag Igniter -N200-
- Removing and installing. Refer to FRONT THORAX AIRBAG WITH IGNITER, REMOVING AND INSTALLING .
- With
- Wire
- From Driver Thorax Airbag Igniter -N199- /Front Passenger Thorax Airbag Igniter -N200- directly to the connector station
- Removing and installing. Refer to FRONT THORAX AIRBAG WIRE, REMOVING AND INSTALLING .
- Bolt
- 10 Nm
- Replace after removing.
- Clean the threaded hole for the bolt with a thread tap, for example
- Install with locking compound. Refer to the Parts Information for the locking compound.