Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front passenger all the way back to the highest position.
-- Disconnect the connector -2- for the passenger occupant detection sensor.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Unclip the mount -arrows- from the seat pan and remove the passenger occupant detection sensor -1- to do this press the seat cushion slightly upward.