Front Child Seat Anchor, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the front passenger seat and fold it to the front with the wires still connected. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Comfort seat: release the backrest cover tension bands -arrow- at the bottom of the seat pan.
-- Remove the expanding rivets -arrows-.
-- Disengage the rear seat frame trim panel -1 and 2- from the backrest hinge and push slightly to the side.
-- If necessary, push the seat frame trim panel slightly to the side and remove the bolts -arrows-.
-- Push the seat trim panel slightly to the side and remove the child seat anchor -1- toward the rear from the front seat.