Overview - Battery Interrupt Igniter

WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Main Fuse Panel

Courtesy of AUDI OF AMERICA, LLC

Main Fuse Panel
- Removing and installing. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
Line
- Allocation. Refer to the appropriate Wiring Diagram.
Nut
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
Line
- Allocation. Refer to the appropriate Wiring Diagram.
Line
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
- Allocation. Refer to the appropriate Wiring Diagram.
Nut
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
Line
- Allocation. Refer to the appropriate Wiring Diagram.
Bolt
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
Line
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
- Allocation. Refer to the appropriate Wiring Diagram.
Nut
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
Line
- Allocation. Refer to the appropriate Wiring Diagram.
Battery Interrupt Igniter -N253-
- Removing and installing. Refer to BATTERY INTERRUPT IGNITER, REMOVING AND INSTALLING .
Nut
- 15 Nm
- Replace after removing.
- Quantity: 2
Connector
- For the Battery Interrupt Igniter -N253-