Flight Mode: Deactivating: Procedure:

WARNING: This page is about a different car, the 2022 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic mode and start the diagnosis.

-- Perform the vehicle identification.

-- Deselect "Working with Guided Fault Finding" by removing v and pressing Accept .

-- Switch to the "Special Functions" tab and select the following program:

Flight mode: deactivating

-- Start the program using Perform test... .

-- Continue the program sequence.

CAUTION:

The fight mode switches off the connection to the mobile network. A vehicle with an active flight more does not have an emergency call function and should not be given to the customer.