Overview - Rear Side Window, A4 AVANT

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The following dimensions represent the distances at the marked points. This must also be oriented to the layout of the original adhesive bead on the removed component.

Fig 1: Rear Side Window, A4 Avant Overview

Courtesy of AUDI OF AMERICA, LLC

Rear Side Window
- Removing and Installing. Refer to REAR SIDE WINDOW, REMOVING AND INSTALLING .
- After installing, push in using the locating pins -item 7-
Adhesive Bead
- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
- Different distances to window edge:
  - Dimension -a- = 8.5 mm
  - Dimension -b- = 7.5 mm
  - Dimension -c- = 7.5 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
Side Window Frame
Molding
- Must not be damaged in the visible area
Trim Molding
- Only for versions with the gloss package
Securing Hole
Centering Pin
- Is cut through when removing the window