Window Guide, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Install the window guide on the door flange in the sequence -1 through 5-.
| Step | |
|---|---|
| 1. | -- Position the upper window guide corner -A- on the C-pillar door flange and align it with the C-pillar trim by installing the C-pillar trim without using screws. Refer to DOOR C-PILLAR TRIM, REMOVING AND INSTALLING . |
| 2. | -- Position the upper window guide corner -B- on the B-pillar door flange and align it with the B-pillar trim by installing the B-pillar trim without using screws. Refer to B-PILLAR DOOR TRIM, REMOVING AND INSTALLING, REAR . |
| 3. | -- Push on the upper window guide -C-, working from the outside toward the inside. |
| 4. | -- Align the window guide -D- on the B-pillar guide rail and insert it into the guide rail. |
| 5. | -- Align the window guide -E- on the C-pillar guide rail and insert it into the guide rail. |
Install in reverse order of removal.