Overview - Hydraulic Pump
WARNING: This page is about a different car, the 2022 Audi S4, 2022 Audi A4 Quattro, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Hydraulic Pump, Removing and Installing. Refer to HYDRAULIC PUMP, REMOVING AND INSTALLING .
- Hydraulic Pump with Hydraulic Cylinders, Removing and Installing. Refer to HYDRAULIC PUMP WITH HYDRAULIC CYLINDERS, REMOVING AND INSTALLING .
- Cover
- For the wiring harness
- Engine
- For the hydraulic pump
- Removing and Installing. Refer to HYDRAULIC PUMP MOTOR, REMOVING AND INSTALLING .
- Driver
- With spring
- No replacement part
- Seal
- No replacement part
- Support Ring
- No replacement part
- Hydraulic Line
- Every hydraulic line has a number printed on it, which must match the number on the base plate
- Removing and Installing. Refer to HYDRAULIC LINE, REMOVING AND INSTALLING .
- Bolt
- 4 Nm
- Quantity: 6
- Retaining Plate
- For the hydraulic lines
- Reservoir
- Fluid Level, Checking. Refer to HYDRAULIC SYSTEM FLUID LEVEL, CHECKING .
- Seal
- Is replaced together with the oil filler plug
- Before installing, lightly coat with engine oil
- Oil Filler Plug
- 1 Nm
- Replace after removing.
- Valve Block
- Seal
- Replace after removing.
- Before installing, lightly coat with engine oil
- Bolt
- 6 Nm
- Quantity: 2