Hydraulic Pump, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S4, 2022 Audi A4 Quattro, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Lift the luggage compartment floor.
-- Remove the storage compartment for the wind deflector.
-- Remove the lock carrier trim panel. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .
-- Press off the bracket -1- from the threaded pins.
-- Remove the tool box -4-.
-- Disconnect the connectors -2-.
-- Place the hydraulic pump -3- with the attached hydraulic lines toward the front.
-- Remove the adhesive strip -2-.
-- Remove the hydraulic pump -4- from the noise insulation -3-.
-- Remove the hydraulic lines. Refer to HYDRAULIC LINE ON VALVE BLOCK, REMOVING AND INSTALLING .