Hydraulic Line On Valve Block, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi S4, 2022 Audi A4 Quattro, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Coat the hydraulic line lightly with hydraulic fluid.

-- Push the hydraulic line by turning in the valve block.

Each hydraulic line has a number printed on it, which must match the number -arrow B- on the valve block.

TIP:

Forcing the hydraulic line will damage the O-ring.

-- Check the oil level. Refer to HYDRAULIC SYSTEM FLUID LEVEL, CHECKING .