Rear Passenger Compartment Monitoring Left And Right Ultrasound Sensor -G981- And -G982-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S4, 2022 Audi A4 Quattro, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the side trim panel. Refer to the appropriate service information .

-- Knock the insulation to the side.

Left:

Courtesy of AUDI OF AMERICA, LLC

-- Release the catches -3 and 4- and loosen the individual sensors -2 and 5- for the rear passenger compartment monitor from the mount.

-- Release the catch -arrow- and remove the rear passenger compartment monitor -6- from the side trim panel.

-- Disconnect the connector -1-.

-- Remove the rear passenger compartment monitor.

Right:

Courtesy of AUDI OF AMERICA, LLC

-- Release the catch -2- and remove the individual sensor -1- for the rear passenger compartment monitor out of the mount.

-- Release the catch -arrow- and remove the rear passenger compartment monitor -3- from the side trim panel.

-- Disconnect the connector -4-.

-- Remove the rear passenger compartment monitor.