Switch on the Hydraulic Cylinders
WARNING: This page is about a different car, the 2022 Audi S4, 2022 Audi A4 Quattro, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Hydraulic Cylinder for Convertible Top Compartment Cover
- Convertible Top Compartment -Open- Switch -F407-
- Removing and Installing. Refer to Convertible Top Compartment -Open- Switch -F407-, REMOVING AND INSTALLING .
- Convertible Top Stowed Position Switch -F171-
- Removing and Installing. Refer to Convertible Top Stowed Position Switch -F171- /Convertible Top Front Closed Position Switch -F202-, REMOVING AND INSTALLING .
- Convertible Top Front Closed Position Switch -F202-
- Removing and Installing. Refer to Convertible Top Stowed Position Switch -F171- /Convertible Top Front Closed Position Switch -F202-, REMOVING AND INSTALLING .
- Convertible Top Drive Hydraulic Cylinder
- Left
- Upper Tensioning Bow Switch -F408-
- Removing and Installing. Refer to Upper Tensioning Bow Switch - F408- /Left Tensioning Bow Lowered Position Switch -F419-, REMOVING AND INSTALLING .
- Left Tensioning Bow Lowered Position Switch -F419-
- Removing and Installing. Refer to Upper Tensioning Bow Switch - F408- /Left Tensioning Bow Lowered Position Switch -F419-, REMOVING AND INSTALLING .
- Tensioning Bracket Hydraulic Cylinder
- Left
- Tensioning Bracket Hydraulic Cylinder
- Right
- Right Tensioning Bow Lowered Position Switch -F420-
- Removing and Installing. Refer to Intermediate Position Bracket Switch -F518- /Right Tensioning Bow Lowered Position Switch -F420-, REMOVING AND INSTALLING .
- Intermediate Position Bracket Switch -F518-
- Removing and Installing. Refer to Intermediate Position Bracket Switch -F518- /Right Tensioning Bow Lowered Position Switch -F420-, REMOVING AND INSTALLING .
- Convertible Top Hydraulic Pump Relay -J321-
- The appropriate Wiring Diagram
- Convertible Top Hydraulic Pump Relay 2 -J588-
- The appropriate Wiring Diagram
- Convertible Top Hydraulic Pump -V118-
- With Power Convertible Top Valve 1 -N272-, Power Convertible Top Valve 2 -N341-, Power Convertible Top Valve 3 -N342-
Convertible Top Compartment -Open- SwitchF407 - Tightening Specification
-- Tighten the screw -3- to 3 Nm.