Mount With Convertible Top Locking Motor -V223-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi S4, 2022 Audi A4 Quattro, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Position the mount -5- with the Convertible Top Locking Motor -V223- and install the bolts -arrows- all the way.
- The mount with the Convertible Top Locking Motor -V223- must be able to move for alignment.
-- Install the ball socket -2- of the control rods on the ball pin.
-- Close the convertible top latch.
-- Tighten the bolts -arrows- on the mount -5- in the removed position using the Convertible Top Locking Motor -V223-.