Rear Convertible Top Seal, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi S4, 2022 Audi A4 Quattro, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Insert the alignment pin -7- and convertible top seal cover -8- in the mount on the tensioning bracket -9-.
-- Insert the convertible top seal guide retaining studs -6- into the retaining strip mount -5- and press the convertible top seal -1- evenly into the retaining strip.
- The convertible top seal guides -2 and 4- must be seated correctly in the mounts on the retaining strip -3-.