Front Convertible Top Seal, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S4, 2022 Audi A4 Quattro, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front trim panel. Refer to FRONT TRIM PANEL, REMOVING AND INSTALLING .
-- Mark the installation position of the convertible top seal -5- for reinstallation.
-- Remove the bolts -1-.
-- Remove the convertible top seal -5- on the side with the retaining strip at the same time pay attention to the spacer plates.
-- Remove the bolts -2-.
-- Remove the convertible top seal -4- with the strip -3-.