LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Convertible Top) >> 61 Convertible Top >> Attachments >> Convertible Top Seals, Removing And Installing >> Center Convertible Top Seal, Removing And Installing >> Removing

Center Convertible Top Seal, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S4, 2022 Audi A4 Quattro, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the center trim panel. Refer to CENTER TRIM PANEL, REMOVING AND INSTALLING .

-- Mark the installation position of the convertible top seal -1- for reinstallation.

Fig 1: Locating Center Convertible Top Seal
GWWA61-11051Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -arrows-.

-- Remove the convertible top seal -1- with retaining strip at the same time pay attention to the spacer plates.