Outer Window Shaft Strip, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the door window into the "open" position.
-- Remove the A-pillar trim. Refer to A-PILLAR TRIM, REMOVING AND INSTALLING .
A4:
-- Using the Wedge Set :T10383/1 , carefully remove the window shaft strip -1- at the B-pillar trim -2- upward from the door flange -arrows-.
A5:
-- Using the Wedge Set :T10383/1 , carefully remove the window shaft strip -1- at the "B-pillar" upward from the door flange -arrows-.
Continuation:
-- Remove the window shaft strip.