Front Wheel Housing Liner, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the drive axle cover. Refer to DRIVE AXLE COVER, REMOVING AND INSTALLING .
-- Remove the clip -3-.
-- Remove the bolt -4- and then disengage the bracket from the fender.
-- If equipped, remove the expanding rivets in the area of the fender.
-- Remove the nut -2- and bolts -1-.
-- Remove the wheel housing liner -5-.