Rear Diagonal Braces, Removing And Installing, RS 4: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of damaging the thread by using an impact wrench.
- When installing, position the bolts by hand and screw in the first threads.
- Do not loosen or tighten the bolts with an impact wrench.
-- Remove the bolts -1 and 3- as well as -arrow- and the diagonal braces -2 and 4-.
 Courtesy of AUDI OF AMERICA, LLC
|