Towing Recognition Control Module -J345-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the left service cover. Refer to OVERVIEW - LUGGAGE COMPARTMENT SIDE TRIM PANEL .
-- Disconnect the connectors -4 through 7-.
-- Release the retainers -1- -arrows- and remove the Towing Recognition Control Module -J345- -2- from the bracket -3-.