Spoiler, Removing And Installing, RS 5: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Mark the installation position of the spoiler.
-- Secure the removal device -1- at the lower left of the window opening.
-- Position the : VAS861001/1A around the spoiler -2-.
-- Secure the outer end of the : VAS861001/1A at the idler pulley on the removal device.
-- Push the inner end of the : VAS861001/1A in the reel device -arrow-.
-- Tension the cutting cord with the reel device.
-- Cut the spoiler free and remove it.