Overview - Roof Railing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- Tightening specification and sequence. Refer to Fig 2.
- Insert with locking fluid. Refer to the Parts Information.
- Quantity: 4
- O-Ring
- Replace if damaged
- Lifter
- 0.5 Nm
- Removing and Installing. Refer to LIFTER, REMOVING AND INSTALLING .
- Install with locking compound. Refer to the Parts Information for the locking compound.
- Quantity: 4
- Seal
- Roof Railing
- Removing and Installing. Refer to ROOF RAILING, REMOVING AND INSTALLING .
- Seal
- Quantity: 3
Roof Railing - Tightening Specification and Sequence
-- Tighten the nuts to 10 Nm in the sequence -2, 3, 4, 1-.