Noise Insulation, Removing And Installing, Front: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

A4, A5 Coupe and A5 Sportback:

Fig 1: Front Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1-.

-- Loosen the quick-release fasteners/bolts -2, 4 and 5-.

-- Remove the front noise insulation -3-.

RS 4, RS 5 and A4 allroad from product improvement:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1-.

-- Loosen the quick-release fasteners -2-.

-- Remove the front noise insulation -3-.

A5 Cabriolet:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1, 2, 4, 7 and 8-.

-- Remove the expanding rivet -arrows-.

-- Loosen the quick-release fasteners -3 and 5-.

-- Remove the front noise insulation -6-.