LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Exterior Equipment) >> 66 Exterior Equipment >> Name Badges And Emblems >> Name Badges And Emblems On Sides, Replacing >> Fender Name Badge, Removing And Installing >> Installing

Fender Name Badge, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Remove the adhesive residue from the body.

-- Clean the adhesive surface with Cleaning Solution: D 009 401 04  and let dry.

-- Remove the protective film from the adhesive tape, position the name badge via the securing pin and push in until it engages audibly.

scientia non olet · About LEMON Manuals