Roof Trim Molding, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- A5 Coupe, from 11/2016: disconnect the tabs -3- on the clips -1 and 2- and the marks -arrow-.
-- A5 Coupe: insert the roof trim molding -1- in the clamps -2 and 3- and push on the side window trim molding connecting clamp -4-.
- The clamp must inserted correctly into the guide.
- The roof trim molding be touching the end of the side window trim molding.
-- Rivet the roof trim molding with the rivet -arrow- in the sequence -1 to 9-.