Sill Panel Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Versions with illuminated sill panel:
-- Remove the front sill panel. Refer to SILL PANEL, REMOVING AND INSTALLING .
-- Loosen the inner door seal in the area of the wiring harnesses.
-- Push the carpet to the side.
-- Disconnect the connector -1- and free up the wiring harness -2-.
Continuation:
-- Carefully warm up the sill panel trim -1- using the : VAS1978/14A .
-- Carefully pry out the sill panel trim from the side sill in direction of -arrow- using the : 3409 . Do not damage the paint coat while doing so.