Door C-Pillar Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the door window into the "open" position.
-- Remove the window frame trim panel. Refer to WINDOW FRAME TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the window guide -1- just far enough from the C-pillar trim -4- until the bolts are accessible.
-- Remove the bolts -A arrows-.
-- Push the C-pillar trim downward in direction of -arrow B-. This will disengage the tab -3- from the opening in the body -2-.
-- Pull the C-pillar trim toward the rear from the holder and upward from the door.