LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Exterior Equipment) >> 66 Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> B-Pillar Trim, Removing And Installing >> Removing

B-Pillar Trim, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Open the front and rear doors.

-- Unclip the cover -1- and remove it downward in direction of -arrow-.

Fig 1: Cover Trim
GWWA66-10796Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3-.

-- Push the B-pillar trim -2- downward -arrow-. While doing this, the upper tab will disengage from the mount -3-.

Fig 2: B-Pillar Trim
GWWA66-10777Courtesy of AUDI OF AMERICA, LLC

-- Remove B-pillar trim from the door seals -1 and 4-.

Removing the Mount: 

GWWA66-12018Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2-.

-- Remove the mount -3-.