B-Pillar Trim, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Position the mount on the B-pillar and tighten the bolts hand-tight.
-- Align the mount according to the marks -arrows- of the inner door seals -1 and 4-.
- The marks must align.
B-Pillar Trim:
-- Mount the B-pillar trim -1- on the B-pillar and push it upward. The guide -2- must fit into the mount -3-.
- The B-pillar trim will lock into the opening -arrow- in the left -5- and right -4- door seal when it is pushed upward.
-- Press on the B-pillar trim.