Rear Muffler Heat Shield, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the rear muffler mounting and lower it slightly using the Engine and Gearbox Jack: VAS6931 . Refer to OVERVIEW - MUFFLER .
-- Remove the nuts -arrows-.
-- Remove the heat shield -1-.
TIP:
g-tron: the retaining pieces from the left heat shield are different then the above illustration.
- Left heat shield: 4 nuts
- Right heat shield: 3 nuts