Rear Heat Shield For Longitudinal Member, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber bulkhead. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .
-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING, REAR .
Right:
-- Remove the front muffler/front exhaust pipe. Refer to OVERVIEW - MUFFLER and OVERVIEW - EMISSIONS CONTROL SYSTEM .
-- Remove the lock washers -arrows-.
-- Remove the heat shield -1-.
Left:
-- Remove the lock washers -arrows-.
-- Remove the heat shield -1-.