Front Heat Shield For Longitudinal Member, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING, REAR .
Left:
-- Remove the bolt -4-.
-- Remove the lock washer -3- and clips -1-.
-- Remove the heat shield -2-.
Right:
-- Remove the bolt -3-.
-- Remove the clips -1 and 4-.
-- Remove the heat shield -2-.