Driveshaft Heat Shield, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the nuts -arrows- and bolt -2- for the underbody trim panel -1- in the heat shield area.
-- Remove the nuts -arrows-.
-- Remove the exhaust system clamping sleeve. Refer to OVERVIEW - MUFFLER and OVERVIEW - EMISSIONS CONTROL SYSTEM .
-- Free up the heat shield -1- from the stud bolts -arrows-.
-- Remove the heat shield from between the exhaust system -2- forward.