LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Striker, Removing And Installing >> Removing

Striker, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lock carrier trim panel. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the nuts -1 and 3- and remove the catch -2-.

Fig 1: Identifying Combination Nuts -1- And -3-, Striker Pin -2-
GWWA55-10449Courtesy of AUDI OF AMERICA, LLC