Rear Lid, Removing And Installing, A4 AVANT: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Release the catches in direction of -arrows- and remove the cover -2- from the hinge -1-.
-- Disconnect the connectors and the antenna wires and free up the wiring harness.
-- Remove the gas-filled strut . Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
-- Remove the bolts -2 and 3-.
-- Remove the rear lid -1-.