Rear Lid Seal, Removing And Installing, A5: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Position the rear lid seal -1- on the body flange.
 Courtesy of AUDI OF AMERICA, LLC
|
- The butt joint -3- of the rear lid seal must be seated centered on the striker -2-.
-- Press on the entire length of the rear lid seal.