Rear Lid Seal, Removing And Installing, A4 AVANT From Product Improvement: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Position the rear lid seal on the body flange.
- The butt joint -1- of the rear lid seal must be positioned centered to the striker.
- The cover lips -2- must be aligned evenly with the tail lamps.
-- Press on the entire length of the rear lid seal.