LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Adjusting Buffer, Removing And Installing >> Adjusting Buffer, Removing And Installing, A4 Sedan, A5 Coupe And A5 Cabriolet >> Removing

Adjusting Buffer, Removing And Installing, A4 Sedan, A5 Coupe And A5 Cabriolet: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn the adjusting buffer -1- counter-clockwise -arrow- to remove.

-- Remove the adjusting buffer locking mechanism -2- from the threaded pin.



-- Loosen the rear lid lower trim panel near the adjusting buffer. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .

-- Turn the adjusting buffer -1- counter-clockwise -arrow- and remove it.

scientia non olet · About LEMON Manuals